Specifications

22-9058 v2.1
Welcome PCPanel IP
Cent. Mon. with IP
Ref. Topics
23
Firewall
Firewalls 1
st
to 5
th
(5 possible Firewall settings restricting the incoming data from the SIP
Receiver to a particular IP address or range of IP addresses)
Default:
“Not Used” (selecting “Firewall” in Mode above, turns on the Firewall selection
boxes)
• Not Used (Firewall inactive)
• Single IP
Enter the IP address of a particular SIP Receiver program that communications are
to be restricted to.
• IP Range
Enter the range of IP addresses that you wish to restrict communications to by
entering the IP address the range begins with in the first address box and the ending address in
the second address box.
Advanced Setup
Timeout (ms) (IP communication timeout)
Default:
“200”
• Leave defaulted. Do not change.
Intergap (ms) (IP communication timeout reply)
Default:
“20”
• Leave defaulted. Do not change.
For any changes made, press the Send To icon on the top config screen tool bar to
download the new information to the IP module. Then press the ‘Disconnect” button after a
successful Send To.