User`s guide

ManualsBrandsVerex ManualsHome building and DecorMonitor ISM

21-0375v4.2

Welcome Alarm Status

Admin

Reference

: Provides access to additional screens.

Name

: Use the

keypad to enter the

user's name, and

select Ok when finished.

Tip: Check the letters on the numeric keypad.

Then, for each letter of the name, quickly press the

specific key until the letter appears (e.g., pressing 2

yields 2, A, B, C; 0 provides 0, Z, <space>, Q, etc).

To move to the next letter-position, use the ► key, or

wait 2 seconds. To retype a previous letter, use the

◄ ► keys, and then enter the letter as before.

Card

: Enter the

version number (if

applicable), and the

access-card/token number for this user, and

select Ok when finished.

If card-access (entry at controlled doors) does not

apply, leave the card number as "000000000".

Version number support is typically set up by your

service technician (service PIN needed).

Firmware revisions needed for 9-digit card IDs, or

cards with version numbers: Panel firmware ≥ V3.2,

and door/elevator controller firmware ≥ V1.5.

: This allows

setting or changing

the P

ersonal ID

umber for this user. (You'll be asked to enter

it twice--to help protect against typing errors.)

The last two digits of the PIN must be different. Also,

do not use consecutive numbers such as 1234.

Lang / Chal: This

screen allows setting

the LCD language for

this user, and whether or not the "physically-

challenged" unlock times and door-held-open

times apply to this user.

Select Lang to 'toggle' the language, or Chal

to 'toggle' the "Challenged" setting. When

finished, select Ok.

Watch the screen for the settings to change.

(You will remain in this same screen.)

To return to the main screen (log out), press the

(8) key a few times, or let the system time-out

(1 minute).

Viewing or Changing Settings for

a User

For an existing user, you can view or edit their

settings as desired.

User (Definition): A person who can use system

keypads, and/or gain entry at access-controlled

doors.

Steps:

1. Log into the

keypad by

entering your user ID and/or PIN as indicated

on-screen.

2. Press ► until

"Users" appears,

& select Users.

3. Enter the specific

user number (and

select Ok), or

select Ok first, and then press ► until the

desired user appears on-screen.

Select Edit.

?: In this screen, "?" pertains to systems with suite

security keypads (allows viewing the user-to-suite

assignments for your selected user number). Note:

Suite-to-user assignments can only be set up

through the MONITOR ISM Director software.

Refer to the details that follow while working with

any of the listed topics:

More: Provides access to additional screens.

Card

: Enter the

version number (if

applicable), and the

access-card/token number for this user, and

select Ok when finished.

If card-access (entry at controlled doors) does not

apply, leave the card number as "000000000".

Version number support is typically set up by your

service technician (service PIN needed).

Firmware revisions needed for 9-digit card IDs, or

cards with version numbers: Panel firmware ≥ V3.2,

and door/elevator controller firmware ≥ V1.5.

. . . .

↓OK

0xx UserName

↓OK vv_nnnnnnnnn

New PIN -

For User 0xx

0xx..Lng:Eng.C:N

↓OK ↓Lang ↓Chal

Welcome

Enter ID: _ _ _

Menu Options ◄ ►

↓PIN ↓Users

0xx Select User

↓OK

0xx ► UserName

↓Edit ↓Delete ↓?

0xx UserName

↓OK vv_nnnnnnnnn