User`s guide

30 MONITOR ISM™ LCD Keypad User's Guide 21-0375v4.2
PIN: This allows
setting or changing
the P
ersonal ID
N
umber for this user. (You'll be asked to enter
it twice--to help protect against typing errors.)
The last two digits of the PIN must be different. Also,
do not use consecutive numbers such as 1234.
Name: Use the
keypad to enter the
user's name, and
select Ok when finished.
Tip: Check the letters on the numeric keypad.
Then, for each letter of the name, quickly press the
specific key until the letter appears (e.g., pressing 2
yields 2, A, B, C; 0 provides 0, Z, <space>, Q, etc).
To move to the next letter-position, use the ► key, or
wait 2 seconds. To retype a previous letter, use the
◄ ► keys, and then enter the letter as before.
Aut
: Use the Next
and Prev buttons to
select an authority
profile for the user. (Select Ok when finished).
This determines what doors the user can enter (and
at what time of day), and the tasks they will be able
to perform at system keypads.
Setting this as Undfnd will delete the user!
User authority profiles themselves are normally set
up by your service technician (service PIN needed).
System
/ Condo
(Suite): For
systems with suite
security keypads, this
screen allows
accessing the
System authority screen (same as Aut,
above), and the Condo (Suite) authority
screen.
Tip: Press 8 if you do not wish to use this screen.
Use the Next and Prev buttons to select an
authority profile for the user. (Select Ok when
finished).
Condo (Suite) Authority of "Undfnd": This is a
reserved suite user (that can be edited by a user with
suite "Master" authority).
Suite-to-user assignments can only be set up
through the MONITOR ISM Director software.
Lang / Chal: This
screen allows setting
the LCD language for
this user, and whether or not the "physically-
challenged" unlock times and door-held-open
times apply to this user.
Select Lang to 'toggle' the language, or Chal
to 'toggle' the "Challenged" setting. When
finished, select Ok.
Watch the screen for the settings to change.
(You will remain in this same screen.)
To return to the main screen (log out), press the
(8) key a few times, or let the system time-out
(1 minute).
Deleting a User
Users can be deleted from the system when
necessary.
To allow tracking card-usage, you can alternatively
leave the user in the system, but set them to an
authority profile that provides no access to doors or
keypads. (See the preceding topic for more info.)
Note: Setting the authority to "undefined" will delete
the user (equivalent to selecting Delete).
Steps:
1. Log into the
keypad by
entering your user ID and/or PIN as indicated
on-screen.
2. Press ► until
"Users" appears,
& select Users.
3. Enter the specific
user number (and
select Ok), or
select Ok first, and then press ► until the
desired user appears on-screen.
With the desired user
on-screen, select
Delete.
Then, select Yes to
delete the user, or
New PIN -
- - -
For User 0xx
UserName . . . .
↓OK
0xx AuthProfile
↓Ok ↓Next ↓Prev
0xx UserName
↓System ↓Condo
0xx AuthProfile
↓Ok ↓Next ↓Prev
0xx..Lng:Eng.C:N
↓OK ↓Lang ↓Chal
Welcome
Enter ID: _ _ _
Menu Options ◄ ►
↓PIN ↓Users
0xx Select User
↓OK
0xx ► UserName
↓Edit ↓Delete ↓?
Del?
↓Yes ↓Cancel