User`s guide
21-0375v4.2
Welcome Alarm Status
Admin
Reference
31
select Cancel if you changed your mind.
To return to the main screen (log out), press the
(8) key a few times, or let the system time-out
(1 minute).
Setting the Date and Time
The panel date and time can be set through an
LCD keypad if necessary.
"Service Test" authority is required to set the date
and/or time.
For a reference of the dates to automatically switch
between standard time and daylight-savings time,
refer to "Holidays and Time-Change Dates" (in the
Reference section).
Steps:
1. Enter your user ID
and/or PIN to log
into the keypad.
2. Press ► until
"Time" appears,
and then select
Time.
3. Enter current
Date and Time.
Watch the flashing cursor as you enter the
year, month, day, hours, and minutes (2 digits
each).
When finished, select Ok.
Enter the hours as 00-23 (24-hr. clock).
You can use the (◄ ►) keys to scroll back or
forward within the date or time if needed.
To return to the main screen (log out), press
the (8) key a few times, or let the system time-
out (1 minute).
Viewing the History
All activity that occurs in the system can be
viewed one event at a time. This includes
area/door activity, as well as the tasks that
users have performed at a keypad.
Depending on your system type and licensing, up to
65 536 events will be recorded.
Viewing an area's history requires authority for that
area.
Steps:
1. Enter your user ID
and/or PIN to log
into the keypad.
2. Press ► until
"History" appears.
Select History.
3. Select All for a
complete list, or
Category for
history pertaining to an Area
, Condo (Suite)
keypad, or App
lication module (e.g., Printer).
4. If you selected
Category
, select
your desired topic
(such as by Area). (Condo: Suite Security)
If you selected "All" the area or other item associated
with each event will be shown on-screen.
If you selected by
Area
, the arming-level
for the first area will be
shown, and you can select:
• Hist: Shows the log of events for the
displayed area;
• Next Area: Jumps to the next area.
To cycle through the
History press the
(◄►) right or left
arrow keys. For more details about this event
select "...".
Press either key to continue viewing the History.
"T/L" next to the time indicates that the date/time had
not been set when the event occurred.
To return to the main screen (log out), press
the (8) key a few times, or let the system time-
out (1 minute).
Welcome
Enter ID: _ _ _
Menu Options ◄ ►
↓Test ↓Time
Date YY-MM-DD
Time HH:MM ↓Ok
Welcome
Enter ID: _ _ _
Menu Options ◄ ►
↓Bypass ↓History
View History of:
↓All ↓Category
View History of:
↓Area ↓Condo ↓App
AreaName.....Off
↓Hist ↓Next Area
xxx ► 1:23pMar
Event ...↓