Owner's manual
Table Of Contents
- NURIT 8000
- Preface
- Overview
- Setup
- Specifications
- Maintenance and Cleaning
- Troubleshooting Guidelines
- NURIT 8000 Appears to Have No Power
- Transactions Cannot be Completed Successfully
- Wireless Communication Does Not Work
- Operation with Peripheral Device Not Successful
- Printer Does Not Print
- Printer Continues Printing When Out of Paper
- Magnetic Stripe Card Reader Does Not Function Properly
- Smart Card Reader Does Not Function Properly
- The Keypad Does Not Respond
- An Incorrect Response or Data Is Obtained
- “Tampered Device” Displayed On Screen and Keypad Inoperable
- Service and Support
- Index
- Contact VeriFone
SETUP
Installing SIM, SAM, and SD Cards
NURIT 8000 I
NSTALLATION GUIDE 17
5 Press down on the SD/MMC card while sliding it into the slot, until the card
snaps into place.
Figure 7 Inserting the SD/MMC Card
6 If necessary, replace the battery. See Figure 9.
7 Replace the battery/card compartment cover. See Figure 5.
To remove an SD/
MMC Card
1 Remove the battery/card compartment door. See Figure 4.
2 If necessary, remove the battery. See Figure 10.
3 With one hand press down on the SD/MMC locking tab, while sliding the card
out with your other hand.
4 Remove the SD/MMC card.
Figure 8 Removing the SD/MMC Card
5 If necessary, replace the battery. See Figure 9.
6 Replace the battery/card compartment cover. See Figure 5.