Owner's manual
Table Of Contents
- NURIT 8000
- Preface
- Overview
- Setup
- Specifications
- Maintenance and Cleaning
- Troubleshooting Guidelines
- NURIT 8000 Appears to Have No Power
- Transactions Cannot be Completed Successfully
- Wireless Communication Does Not Work
- Operation with Peripheral Device Not Successful
- Printer Does Not Print
- Printer Continues Printing When Out of Paper
- Magnetic Stripe Card Reader Does Not Function Properly
- Smart Card Reader Does Not Function Properly
- The Keypad Does Not Respond
- An Incorrect Response or Data Is Obtained
- “Tampered Device” Displayed On Screen and Keypad Inoperable
- Service and Support
- Index
- Contact VeriFone
SETUP
Power Supply
24 NURIT 8000 INSTALLATION GUIDE
Car Adapter
Connection
The car adapter is an optional accessory. You can use the car adapter to provide
power to the NURIT 8000 and to charge the installed Lithium-polymer battery.
For information on ordering a car adapter for the NURIT 8000 terminal, see
Accessories and Documentation.
To connect the car
adapter
Connect one end of the car adapter cable to the Power port on the back of the
terminal and the other into the vehicle’s electrical power socket.
Figure 16 Car Adapter Power Supply Connection
To remove the car
adapter
Unplug the car adapter from the vehicle’s electrical power socket and then from
the power connector, at the front of the NURIT 8000 terminal.
NOTE
The LED indicator on the car adaptor indicates the charge status of the battery,
as described in Battery Charge Status.