Owner's manual
Table Of Contents
- NURIT 8000
- Preface
- Overview
- Setup
- Specifications
- Maintenance and Cleaning
- Troubleshooting Guidelines
- NURIT 8000 Appears to Have No Power
- Transactions Cannot be Completed Successfully
- Wireless Communication Does Not Work
- Operation with Peripheral Device Not Successful
- Printer Does Not Print
- Printer Continues Printing When Out of Paper
- Magnetic Stripe Card Reader Does Not Function Properly
- Smart Card Reader Does Not Function Properly
- The Keypad Does Not Respond
- An Incorrect Response or Data Is Obtained
- “Tampered Device” Displayed On Screen and Keypad Inoperable
- Service and Support
- Index
- Contact VeriFone
SETUP
Using the Magnetic Stripe Card Reader
NURIT 8000 I
NSTALLATION GUIDE 27
Using the
Magnetic Stripe
Card Reader
The magnetic stripe card reader is located at the top end of the NURIT 8000
terminal. Use the magnetic stripe card reader with a magnetic stripe card.
To use the magnetic
stripe card reader
1 Hold the card with the magnetic stripe positioned down and facing towards
the LCD display.
2 Insert the card into one end of the card reader slot.
3 Swipe the card in a smooth, continuous movement, all the way through the
slot.
Figure 20 Swiping Magnetic Card
NOTE
For guidance, a pictogram near the card slot indicates how to swipe the magnetic
stripe card in the card reader.
The magnetic stripe card reader supports bi-directional swiping of cards.