Owner's manual
Table Of Contents
- NURIT 8000
- Preface
- Overview
- Setup
- Specifications
- Maintenance and Cleaning
- Troubleshooting Guidelines
- NURIT 8000 Appears to Have No Power
- Transactions Cannot be Completed Successfully
- Wireless Communication Does Not Work
- Operation with Peripheral Device Not Successful
- Printer Does Not Print
- Printer Continues Printing When Out of Paper
- Magnetic Stripe Card Reader Does Not Function Properly
- Smart Card Reader Does Not Function Properly
- The Keypad Does Not Respond
- An Incorrect Response or Data Is Obtained
- “Tampered Device” Displayed On Screen and Keypad Inoperable
- Service and Support
- Index
- Contact VeriFone
NURIT 8000 INSTALLATION GUIDE 31
CHAPTER 4
Maintenance and Cleaning
The NURIT 8000 has no user-serviceable parts.
In order to maintain the NURIT 8000 in proper working condition:
• Keep the terminal dry and in the cleanest possible working and storage
environment.
• Do not store the terminal in extremely hot or cold areas.
• Do not shake or drop the terminal.
Cleaning the
NURIT 8000
Disconnect the device from the power supply and any peripherals before cleaning.
To clean the NURIT
8000
• Gently wipe off dirt from the body of the terminal with a soft, damp, lint-free
cloth. A very mild dishwashing detergent can be used to dampen the cloth.
• If available, a low-pressured blower can be used to remove dirt accumulated
around the keypad buttons.
• Use a soft cloth, an eyeglass lens wiper, or a lens blower to remove dust and
dirt from the LCD screen.
CAUTION
• Opening or disassembling the terminal in any way automatically erase all
secret encryption keys and will render the PIN pad inoperable.
• Opening the terminal will void any warranty and security certification. It may
also result in irreversible damage to the unit’s electronic circuitry.