User's Manual
Table Of Contents
- Verifone Carbon Installation Guide
- Contents
- Preface
- Device Overview
- Setup
- Selecting Unit Location
- Unpacking the Shipping Carton
- Periodic Inspection
- Examining the Unit’s Features
- Establishing Communication
- Loading a Paper Roll in the Printer
- Installing or Replacing MSAM Cards
- Connecting Optional Devices
- Connecting the Terminal Power Pack
- Using the Smart Card Reader
- Using the Magnetic Card Reader
- Using the Contactless Reader
- Specifications
- Maintenance and Cleaning
- Service and Support
- Troubleshooting Guidelines
- Port Pinouts
- Appendix
- Contact Verifone
SETUP
Examining the Unit’s Features
V
ERIFONE CARBON INSTALLATION GUIDE 17
R
E
VI
SIO
N
A
.
2
Connection Ports
Turn the printer stand upside down to view the connection ports. The ports provide
communications, peripheral device connections, and power supply.
Figure 2 shows the power, communications and connection ports for the Verifone
Carbon printer stand.
Figure 2 Power and Communication Ports
To use the
connection ports
The connection ports offer multiple connectivity for the Verifone Carbon terminal.
Please refer to the following list of peripheral devices for the connectivity options.
Host USB Port
• PIN Pads
• Barcode readers
• Biometric readers
• USB flash disk
• USB keyboards
Ethernet Port
• Ethernet cable to router, hub or switch
Multi-Communication Port (USB/RS-232)
• PIN Pads
WARNING
Do not connect the device to the power supply until all peripherals are attached.
NOTE
Verifone ships variants of the Verifone Carbon terminals for different markets.
Your terminal may have different features described in this section.