User's Manual
Table Of Contents
- Verifone Carbon Installation Guide
- Contents
- Preface
- Device Overview
- Setup
- Selecting Unit Location
- Unpacking the Shipping Carton
- Periodic Inspection
- Examining the Unit’s Features
- Establishing Communication
- Loading a Paper Roll in the Printer
- Installing or Replacing MSAM Cards
- Connecting Optional Devices
- Connecting the Terminal Power Pack
- Using the Smart Card Reader
- Using the Magnetic Card Reader
- Using the Contactless Reader
- Specifications
- Maintenance and Cleaning
- Service and Support
- Troubleshooting Guidelines
- Port Pinouts
- Appendix
- Contact Verifone
SETUP
Connecting the Terminal Power Pack
24 VERIFONE CARBON INSTALLATION GUIDE
R
E
VI
SIO
N
A
.
2
Contact your Verifone representative or visit the online store at
www.store.verifone.com for information on these devices.
Connecting ECRs to
the Verifone Carbon
The Verifone Carbon supports electronic cash registers (ECRs).
The following illustration shows how to make a peripheral connection to the Multi-
Communication port using the MOD 10 RS-232 + USB Multi-Communication
dongle (VPN CBL420-002-01-A)
Figure 10 Sample ECR Connection
Connecting the
Terminal Power
Pack
After connecting optional peripherals, prepare to connect the Verifone Carbon to
your power source.
To connect the
terminal power pack
1 Remove the terminal rear cover to access the power port.
CAUTION
Using an incorrectly rated power supply may damage the terminal or cause it not
to work as specified. Before troubleshooting, ensure that the power supply being
used to power the terminal matches the requirements specified on the bottom of
the terminal. (See Chapter 3, Technical Specifications, for detailed power supply
specifications.) Obtain the appropriately rated power supply before continuing
with troubleshooting.
NOTE
Plugging in the power pack to a power source automatically turns on the
terminal.