User's Manual

R
EV
I
S
I
O
N
A
.
1
CARBON 8 INSTALLATION GUIDE 13
CHAPTER 2
Setup
This chapter describes the setup procedures for the Carbon 8, under the following
sections:
• Selecting Unit Location
• Unpacking the Shipping Carton
• Examining the Unit’s Features
• Establishing Communication
• Loading a Paper Roll in the Printer
• Installing or Replacing MSAM Cards
• Connecting Optional Devices
• Connecting the Power Pack
• Using the Smart Card Reader
• Using the Magnetic Card Reader
• Using the Contactless Reader
Selecting Unit
Location
Use the following guidelines when selecting a location for your device.
Ease of Use • Select a location convenient for both merchant and cardholder.
• Select a flat support surface, such as a countertop or table.
• Select a location near a power outlet and a network connection.
• For safety, do not string the power cord or other cables in a walkway or place it
across a walkway on the floor.