User's Manual

SETUP
Establishing Communication
18 CARBON 8 INSTALLATION GUIDE
R
EV
I
S
I
O
N
A
.
1
Figure 4 shows the power, communications and connection ports for the Carbon 8
Stand.
Figure 4 Power and Communication Ports
Establishing
Communication
You can connect the Carbon 8 Stand to your network using an ethernet cable. You
can also connect using the Wi-Fi option.
Connecting by
Ethernet Cable
Connect the ethernet cable to the ETH port on the stand, then route it directly to a
network jack (see Figure 5). This is a direct connection to your network.
Figure 5 Ethernet Connection
Connecting by Wi-Fi
Connect to Wi-Fi by enabling Wi-Fi connectivity on the Tablet or Stand. Select this
option from the Network Settings on the Merchant Tablet.
ETHERNET
PORT
POWER
PORT
0.5 A USB
PORTS
SERVICE
PORT
CASH DRAWER
PORT
1 A USB
PORT
(SERVICE USE ONLY)
WARNING
Do not connect the device to the power supply until all peripherals are attached.