User's Manual

SETUP
Connecting the Power Pack
26 CARBON 8 INSTALLATION GUIDE
R
EV
I
S
I
O
N
A
.
1
To connect the power
pack
1 Turn the Stand over to access the power port.
2 Insert the round barrel connector (see A in Figure 15) into the power port, then
tuck the cable under the Stand leg nearest the power port.
Figure 15 Power Connection
3 Connect the power adapter to the power brick (see B in Figure 15).
4 Plug the AC power pack into a wall outlet or power surge protector.
WARNING
Do not plug the power pack into an outdoor outlet or operate the terminal
outdoors.
Disconnecting the power during a transaction may cause transaction data files
not yet stored in terminal memory to be lost.
To protect against possible damage caused by lightning strikes and electrical
surges, consider using a power surge protector.