Installation Guide

CARBON MOBILE 5 INSTALLATION GUIDE 15
CHAPTER 2
Device Setup
This chapter describes the device setup procedure. You will learn about:
• Usage Guidelines
• Unpacking the Shipping Carton
• Examining Verifone Carbon Mobile 5 Device Features
• Examining Connection Port
• Installing or Replacing MSAM Cards
• Examining Connection Port
• Using the Battery
• Connecting the Terminal Power Pack
• Loading a Paper Roll in Device with Printer
• Charging the Battery
• Using the Smart Card Reader
• Using the Magnetic Card Reader
• Using the CTLS Reader
Usage
Guidelines
Use the following guidelines when using your Verifone Carbon Mobile 5.
Environmental
Factors
• Select a flat support surface, such as a countertop or table, place the device.
Please store your Verifone Carbon Mobile 5 device in a dry area:
• Operation temperature is -10--50 degree Celsius ( 14--122 F).
• Storage temperature is -25--70 degree Celsius (-13--158 F).
• Do not use the device where there is high heat, dust, humidity, moisture, or
caustic chemicals or oils.
• Keep the device away from direct sunlight and anything that radiates heat,
such as a stove or motor.
CAUTION
The device is not waterproof or dustproof, and is intended for indoor use only.
Any damage to the unit from exposure to rain or dust may void any warranty.