Product Info
Table Of Contents
- About the Document
- Contents
- Table Index
- Figure Index
- 1Introduction
- 2Product Concept
- 3Application Interfaces
- 3.1.General Description
- 3.2.Pin Assignment
- 3.3.Pin Description
- 3.4.Power Supply
- 3.5.Turn on and off Scenarios
- 3.6.VRTC Interface
- 3.7.Power Output
- 3.8.Battery Charge and Management
- 3.9.USB Interface
- 3.10.UART Interfaces
- 3.11.(U)SIM Interfaces
- 3.12.SD Card Interface
- 3.13.GPIO Interfaces
- 3.14.I2C Interfaces
- 3.15.ADC Interfaces
- 3.16.Motor Drive Interface
- 3.17.LCM Interface
- 3.18.Touch Panel Interface
- 3.19.Camera Interfaces
- 3.20.Sensor Interfaces
- 3.21.Audio Interfaces
- 3.22.Emergency Download Interface
- 4Wi-Fi and BT
- 5GNSS
- 6Antenna Interface
- 7Electrical, Reliability and Radio Characteristics
- 8Mechanical Dimensions
- 9Storage, Manufacturing and Packaging
- 10Appendix A References
- 11Appendix B GPRS Coding Schemes
- 12Appendix C GPRS Multi-slot Classes
- 13Appendix D EDGE Modulation and Coding Schemes
Smart LTE Module Series
SC20 Hardware Design
SC20_Hardware_Design Confidential / Released
1-10
/ 122
1 Introduction
This document defines the SC20 module and describes its air interface and hardware interface which are
connected with customers’ application.
This document can help customers quickly understand module interface specifications, electrical and
mechanical details as well as other related information of SC20 module. Associated with application note
and user guide, customers can use SC20 module to design and set up mobile applications easily.
1.1. Safety Information
The following safety precautions must be observed during all phases of operation, such as usage, service
or repair of any cellular terminal or mobile incorporating SC20 module. Manufacturers of the cellular
terminal should send the following safety information to users and operating personnel, and incorporate
these guidelines into all manuals supplied with the product. If not so, Quectel assumes no liability for
customers’ failure to comply with these precautions.
Full attention must be given to driving at all times in order to reduce the risk of an
accident. Using a mobile while driving (even with a handsfree kit) causes
distraction and can lead to an accident. You must comply with laws and regulations
restricting the use of wireless devices while driving.
Switch off the cellular terminal or mobile before boarding an aircraft. Make sure it is
switched off. The operation of wireless appliances in an aircraft is forbidden, so as
to prevent interference with communication systems. Consult the airline staff about
the use of wireless devices on boarding the aircraft, if your device offers an
Airplane Mode which must be enabled prior to boarding an aircraft.
Switch off your wireless device when in hospitals,clinics or other health care
facilities. These requests are designed to prevent possible interference with
sensitive medical equipment.