Product Info
Table Of Contents
- About the Document
- Contents
- Table Index
- Figure Index
- 1Introduction
- 2Product Concept
- 3Application Interfaces
- 3.1.General Description
- 3.2.Pin Assignment
- 3.3.Pin Description
- 3.4.Power Supply
- 3.5.Turn on and off Scenarios
- 3.6.VRTC Interface
- 3.7.Power Output
- 3.8.Battery Charge and Management
- 3.9.USB Interface
- 3.10.UART Interfaces
- 3.11.(U)SIM Interfaces
- 3.12.SD Card Interface
- 3.13.GPIO Interfaces
- 3.14.I2C Interfaces
- 3.15.ADC Interfaces
- 3.16.Motor Drive Interface
- 3.17.LCM Interface
- 3.18.Touch Panel Interface
- 3.19.Camera Interfaces
- 3.20.Sensor Interfaces
- 3.21.Audio Interfaces
- 3.22.Emergency Download Interface
- 4Wi-Fi and BT
- 5GNSS
- 6Antenna Interface
- 7Electrical, Reliability and Radio Characteristics
- 8Mechanical Dimensions
- 9Storage, Manufacturing and Packaging
- 10Appendix A References
- 11Appendix B GPRS Coding Schemes
- 12Appendix C GPRS Multi-slot Classes
- 13Appendix D EDGE Modulation and Coding Schemes
Smart LTE Module Series
SC20 Hardware Design
SC20_Hardware_Design Confidential / Released
5-70
/ 122
5 GNSS
SC20 module integrates a Qualcomm IZat™ GNSS engine (GEN 8C) which supports multiple positioning
and navigation systems including GPS, GLONASS and BeiDou. With an embedded LNA, the module
provides greatly improved positioning accuracy.
5.1. GNSS Performance
The following table lists the GNSS performance of SC20 module in conduction mode.
Table 31: GNSS Performance
Parameter
Description
Typ.
Unit
Sensitivity (GNSS)
Cold start
-146
dBm
Reacquisition
-158
dBm
Tracking
-160
dBm
TTFF (GNSS)
Cold start
32
s
Warm start
30
s
Hot start
2
s
Static Drift (GNSS)
CEP-50
6
m
5.2. GNSS RF Design Guidance
Bad design of antenna and layout may cause reduced GPS receiving sensitivity, longer GPS positioning
time, or reduced positioning accuracy. In order to avoid this, please follow the reference design rules as
below: