Installation Guide

DEVICE SETUP
Examining Verifone Carbon Mobile 5 Device Features
C
ARBON MOBILE 5 INSTALLATION GUIDE 17
5 Save the shipping carton and packing material for future repacking or storing
the device.
Examining
Verifone Carbon
Mobile 5 Device
Features
Before you continue the installation process, familiarize yourself with the features
of the Verifone Carbon Mobile 5 (See Figure 2.)
Front Panel
The front panel includes the following features:
Figure 2 Verifone Carbon Mobile 5 (Front Panel)
• The Verifone Carbon Mobile 5 device has a colored capacitive-touch LCD
Display
• A smart card reader built into the top of the device to process smart card-
based debit or credit transactions. For directions on how to use a smart card,
see Using the Smart Card Reader.
• A magnetic card reader built into the bottom part of the device for performing
debit or credit card transactions. The card can be swiped from either direction.
To ensure a proper read of the magnetic swipe card, insert the magnetic card
from the side of the device as shown in
Figure 7.
• The Verifone Carbon Mobile 5 device has a power/charging indicator.
• ALL LED's to indicate CTLS, EMV, MSR, BT, and Wi-Fi are shown ON the
display.
• CTLS around the display for contactless payments. For directions on how to
conduct contactless transactions, see Using the CTLS Reader.
NOTE
• Charge the Verifone Carbon Mobile 5 device for eight hours before initial use.
• The Verifone Carbon Mobile 5 device comes with an extra battery, that will power
the security circuit of the device, in case the device is tampered, and the main battery
fails to charge. This extra battery has a life of 2 yrs.
• Ensure not to store the device for more than 1 week without charging, else the
secondary battery gets discharged in turn reducing the life of the battery.
1
1