user manual

TERMINAL SETUP
Install/Replace MSAM Cards
V
X
5XX/V
X
6XX INSTALLATION GUIDE 19
7 Close the paper roll cover by gently pressing directly on the cover until it clicks
shut, allowing a small amount of paper past the glue residue to extend outside
the printer door. (see Figure 10).
Figure 10 Closing Paper Roll Cover
8 Tear the paper off against the serrated metal strip in the printer.
For paper ordering information, refer to Accessories and Documentation.
Install/Replace
MSAM Cards
When you first receive your V
x
5xx/V
x
6xx terminal, you may need to install one or
more MSAM cards or you may need to replace old cards.
To Install/Replace
MSAMs
1 Remove the power cord and/or battery (see Smart Battery) from the terminal.
2 Place the terminal upside down on a soft, clean surface to protect the lens
from scratches.
CAUTION
To prevent the paper roll cover from damaging the print roller, always gently press
down on the printer dust cover to close it.
CAUTION
Observe standard precautions when handling electrostatically sensitive devices.
Electrostatic discharges can damage this equipment. VeriFone recommends
using a grounded anti-static wrist strap.