user manual

TERMINAL SETUP
Connect Optional Device(s)
V
X
5XX/V
X
6XX INSTALLATION GUIDE 23
V
x
6xx Optional
Device Connections
The side port of the V
x
6xx terminal can operate either as a PINpad port or an RS-
232 port, depending on the power source available.
Connecting the PINpad or Smart Card Reader to the V
x
6xx
When plugged in and not operating off battery power, the side port operates as a
PINPad port and the terminal can be connected to a PINpad (see Figure 16).
Use the following procedure to connect a PINpad or smart card reader.
1 Insert the RJ45-type connector on the end of the PINpad or smart card reader
into the port on back of the peripheral device.
To install a PINpad 101, PINpad 201, or PINpad 1000, position and insert the
grommet to secure the cable connection.
If a cable is not already connected to the smart card reader or PINpad, insert
the small modular plug on one end of the interface cable into the optional
device’s modular jack.
2 Insert the larger RJ45-type connector on the other end of the PINpad cable
into the PINpad serial port on the side of the terminal. Figure 16 provides an
example of a smart card reader and PINpad connection to the PINpad serial
port.
Figure 16 V
x
6xx Example PINpad Serial Port Connections