Installation Guide
Table Of Contents
- E235 Installation Guide
- Contents
- Preface
- Device Overview
- Device Setup
- Terminal Location
- Inside the Shipping Carton
- Device Features
- Removing the Battery Cover
- Installing micro SIM and/or SAM Cards
- Initial Battery Charging
- Starting Up and Shutting Down
- Using the Battery
- Connecting to a Computer
- Conducting Wireless Transactions
- Using the Smart Card Reader
- Using the Magnetic Card Reader
- Using the CTLS Reader
- Using Accessories
- Specifications
- Maintenance and Cleaning
- Verifone Service and Support
- Troubleshooting Guidelines
- Caution and Warning Messages
- Contact Verifone
DEVICE SETUP
Inside the Shipping Carton
12 E235 INSTALLATION GUIDE
• Do not use the device outdoors.
Personal Security
Considerations
The e235 is a handover device. Always exercise extreme caution when
conducting transactions, especially during PIN entry.
• Hand over the e235 device directly to the cardholder for PIN entry.
• Encourage the cardholder to hold the e235 device closer to avoid others from
seeing the information entered.
Electrical
Considerations
• Avoid using this product during electrical storms.
• Avoid locations near electrical appliances or other devices that cause
excessive voltage fluctuations or emit electrical noise (for example, air
conditioners, electric motors, neon signs, high-frequency or magnetic security
devices, or computer equipment).
• Do not use the terminal near water or in moist conditions.
• Disconnect the device from its POS terminal before cleaning.
Contactless
Considerations
Avoid having metallic objects in the proximity of a contactless antenna. If you need
to mount the terminal to vertical or inclined surfaces, use a flat, non-metallic
mounting plate.
The device is not waterproof or dustproof and is intended for indoor use only. Any
damage to the unit from exposure to rain or dust may void any warranty.
Inside the
Shipping Carton
Open the shipping carton and carefully inspect its contents for possible tampering
or shipping damage. The e235 is a secure product and any tampering may cause
the device to cease to function properly.
Unpacking the
Shipping Carton
To unpack the shipping carton:
1 Remove and inspect the contents of the shipping carton. The terminal ships in
multiple configurations. The carton may include all or any of the following:
• Terminal
• Connectivity cable
2 Remove all plastic wrapping from the terminal and components.
3 Remove the clear protective film from the display.
CAUTION
The device is not waterproof or dustproof and is intended for indoor use only. Any
damage to the unit from exposure to rain or dust may void any warranty.
CAUTION
Using an enclosed metal frame or mount may negatively affect contactless
performance.