Installation Guide
Table Of Contents
- E235 Installation Guide
- Contents
- Preface
- Device Overview
- Device Setup
- Terminal Location
- Inside the Shipping Carton
- Device Features
- Removing the Battery Cover
- Installing micro SIM and/or SAM Cards
- Initial Battery Charging
- Starting Up and Shutting Down
- Using the Battery
- Connecting to a Computer
- Conducting Wireless Transactions
- Using the Smart Card Reader
- Using the Magnetic Card Reader
- Using the CTLS Reader
- Using Accessories
- Specifications
- Maintenance and Cleaning
- Verifone Service and Support
- Troubleshooting Guidelines
- Caution and Warning Messages
- Contact Verifone
DEVICE SETUP
Using the Battery
18 E235 INSTALLATION GUIDE
• A battery subjected to an extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas.
Battery Life
Charging and discharging the e235 battery hundreds of times will wear out the
battery. Significantly reduced operating times indicate the need for battery
replacement (see Accessories and Documentation for ordering information).
Charging the
Battery
After installing the battery, the e235 device can be connected to the optional
power pack or charged with a wireless charger.
Charging via the
Power Pack
Verifone offers the optional power supply (VPN PWR087-300-01-A) to connect
the device directly to a power outlet and charge the battery.
1 Insert the USB-C plug into the USB-C port of the e235 device.
2 Plug the AC power pack into a wall outlet or powered surge protector.
Charging with the
Folio
Verifone also offers wireless charging accessories (VPN TBD) that can be
connected to the optional power supply (VPN PWR087-300-01-A) to charge the
e235 device when fitted with the Folio accessory.
1 Insert the USB-C plug into the USB-C port of the wireless charging accessory.
2 Plug the AC power pack into a wall outlet or powered surge protector.
WARNING
Do not dispose of batteries in a fire. Li-ion batteries must be
recycled or disposed of properly. Do not dispose of Li-ion batteries
in municipal waste sites.
CAUTION
Using an incorrectly rated power supply may damage the device or cause it not
to work as specified. Before troubleshooting, ensure that the power supply being
used to power the device matches the requirements specified on the bottom of
the device. (See Specifications for details.) Obtain the appropriately rated power
supply before continuing with troubleshooting.
WARNING
Do not plug the power pack into an outdoor outlet or operate the device outdoors.
During a transaction, disconnecting the power by removing the battery or
unplugging the device from a wall power while at a very low battery charge may
cause transaction data files not yet stored in the device memory to be lost.
TIP
To protect against possible damage caused by lightning strikes and electrical
surges, consider installing a power surge protector.