Installation Guide
Table Of Contents
- E235 Installation Guide
- Contents
- Preface
- Device Overview
- Device Setup
- Terminal Location
- Inside the Shipping Carton
- Device Features
- Removing the Battery Cover
- Installing micro SIM and/or SAM Cards
- Initial Battery Charging
- Starting Up and Shutting Down
- Using the Battery
- Connecting to a Computer
- Conducting Wireless Transactions
- Using the Smart Card Reader
- Using the Magnetic Card Reader
- Using the CTLS Reader
- Using Accessories
- Specifications
- Maintenance and Cleaning
- Verifone Service and Support
- Troubleshooting Guidelines
- Caution and Warning Messages
- Contact Verifone
DEVICE SETUP
Using the Battery
E235 INSTALLATION GUIDE 19
3 Set the rear cover of the Folio-equipped e235 device against the front face of
the wireless charger.
Upon startup, the e235 device loads its application, displays the Verifone
copyright screen and shows a unique copyright screen.
Connecting the e235
to a Power Source
or a Host Computer
Plug the wall-mount charger to an external power source and connect it to the
e235 to charge the device. You can also connect the e235 to a computer to
synchronize data and/or charge the device.
To Connect the e235
to a Wall-mount
Charger
1 Plug the Verifone-certified wall-mount charger into a wall outlet or powered
surge protector.
NOTE
When the e235 device is fitted with the Folio accessory, the Folio has inductive
charging that allows charging from any Qi charger.
Verifone provides specific accessories, as well (see Accessories and
Documentation for ordering information).
NOTE
If there is no available application in the device, DOWNLOAD NEEDED appears on
the screen after the initial Verifone copyright screen.
NOTE
Charge the e235 device for eight hours before initial use.