Installation Guide
Table Of Contents
- E235 Installation Guide
- Contents
- Preface
- Device Overview
- Device Setup
- Terminal Location
- Inside the Shipping Carton
- Device Features
- Removing the Battery Cover
- Installing micro SIM and/or SAM Cards
- Initial Battery Charging
- Starting Up and Shutting Down
- Using the Battery
- Connecting to a Computer
- Conducting Wireless Transactions
- Using the Smart Card Reader
- Using the Magnetic Card Reader
- Using the CTLS Reader
- Using Accessories
- Specifications
- Maintenance and Cleaning
- Verifone Service and Support
- Troubleshooting Guidelines
- Caution and Warning Messages
- Contact Verifone
DEVICE SETUP
Connecting to a Computer
20 E235 INSTALLATION GUIDE
2 Insert the Micro-USB cable into the port located on the side of the e235.
Figure 5 Connecting the e235 to a Wall-mount Charger
Connecting to a
Computer
Connect the e235 device to a PC or laptop to download applications.
1 Insert the USB-C plug into the USB-C port of the e235 device.
2 Connect the other end of the USB-C plug into the host computer’s USB port.
Conducting
Wireless
Transactions
To conduct a wireless transaction:
• Ensure that the device is in an optimal position for transmission.
• Follow the on-screen instructions provided with your application.
Using the Smart
Card Reader
The smart card transaction procedure may vary from one application to another.
Verify the procedure with your application provider before performing a smart card
transaction.
1 Position the smart card with the contacts facing upward (see illustration
below).
2 Insert the card into the reader slot in a smooth, continuous motion until it seats
firmly.