User's Manual

DEVICE SETUP
Examining e265 Device Features
14 E265 INSTALLATION GUIDE
V
E
R
I
F
O
N
E
C
O
N
F
I
DE
N
T
I
A
L
R
E
VIS
I
O
N
A
.
6
5 Insert the MSAM card with the gold contacts facing up. Make sure that the
MSAM card is fully inserted to be able to re-insert the battery.
6 Re-insert the battery by aligning the gold contacts in the battery with the pins
on the e265 device.
Figure 5 Inserting an MSAM Card
7 Place the battery cover back and tighten the screw.
Figure 6 Returning the Battery Cover
Manually Starting
and Resetting the
e265
To turn on the e265, press and hold the Enter key for at least five seconds.
The Reset Button is located just above the Power LED Indicator.
NOTE
The MSAM slot has a spring-loading mechanism. To remove an MSAM card from
the slot, simply press the card into the slot and then release to eject the card.
NOTE
The plastic tab attached to the battery allows you to easily remove the battery from
the compartment. Make sure that the plastic tab is still visible after insertion.
05,,
+
-
05,,
+
-
05,,
+
-
05,,
+
-
CAUTION
The Reset Button resets the device to its initialized state. NEVER use the Reset
Button unless instructed by a Verifone support representative.