User's Manual

DEVICE SETUP
Examining e265 Device Features
16 E265 INSTALLATION GUIDE
V
E
R
I
F
O
N
E
C
O
N
F
I
DE
N
T
I
A
L
R
E
VIS
I
O
N
A
.
6
To Connect the e265
to a Host Computer
via Micro-USB
1 Connect the Micro-USB cable into the port located on the side of the e265.
2 Connect the other end of the Micro-USB cable into the host computer’s USB
port.
Figure 8 Connecting the e265 to a Host Computer
Color Behavior
The following table shows the behavior of the LEDs during various system power
states.
Sleep
Battery
Low
Battery
Extremely
Low
Battery
Charging
Charging
Timer
Fault
Normal
Operation
LED Behavior
Y Green, blinks every 4 seconds
Y Red, 1Hz rate, 50% duty cycle
(Battery low condition: battery
voltage <3.7V)
Y Red, 4Hz rate, 50% duty cycle
(Battery extremely low condition:
battery voltage <3.6V)
Y Orange, 1Hz rate, 50% duty cycle
Y Orange, on continuously
Y Green, on continuously
LEDs are turned OFF when
charging the e265 on a gang
charger