User's Manual

DEVICE SETUP
Examining Connection Port
12 E265G INSTALLATION GUIDE
V
E
R
I
F
O
N
E
C
O
N
F
I
DE
N
T
I
A
L
R
E
VIS
I
O
N
A
.
6
• A Power LED located on the right side that acts as system operation state and
charging indicators.
• A CTLS functionality for contactless payments. For directions on how to
conduct contactless transactions, see
Using the CTLS Reader.
• A SAM (security access module) compartment, built into the bottom of the
device inside the back compartment. The e265G contains an MSAM
cardholder to support stored-value card programs or other merhant card
requirements.
Examining
Connection Port
The e265G device has one primary micro-USB port used for power and
download.
Figure 3 The e265G Primary Micro-USB Port
Installing the
SIM card
The e265G device supports the installation of a GSM SIM (Subscriber Identity
Module). Use the following procedure to install a SIM card.
To install or replace
the card
1 Turn off the device.
2 Place the device upside down on a soft, clean surface to protect the lens from
scratches.
3 Loosen the retaining screw. The restaining screw is captive, which means that
it cannot be fully removed from the slot.
IMAGE PLACEHOLDER
ACTUAL ILLUSTRATION TO FOLLOW
CAUTION
Observe standard precautions when handling electrostatically sensitive devices.
Electrostatic discharges can damage this equipment. Verifone recommends using
a grounded anti-static wrist strap.