User's Manual
Table Of Contents
- e265G Installation Guide
- Contents
- Preface
- Device Overview
- Device Setup
- Usage Guidelines
- Unpacking the Shipping Carton
- Examining e265G Device Features
- Examining Connection Port
- Installing the SIM card
- Using the Battery
- Battery Behavior (No Power Pack)
- Connecting the Terminal Power Pack
- Charging the Battery
- Connecting to a Computer
- Conducting Wireless Transactions
- Using the Smart Card Reader
- Using the Magnetic Card Reader
- Using the CTLS Reader
- Specifications
- Maintenance
- Verifone Service and Support
- Troubleshooting Guidelines
- Contact Verifone
DEVICE SETUP
Installing the SIM card
E265G INSTALLATION GUIDE 13
V
E
R
I
F
O
N
E
C
O
N
F
I
DE
N
T
I
A
L
R
E
VIS
I
O
N
A
.
6
4 Using your fingernail, turn any of the the recessed slots located on both sides
of the e265G device, to pry the back cover open.
Figure 4 Removing the Battery Cover
5 Remove the battery by gently pulling the plastic tab to access the SIM
compartment.
6 Insert the SIM card with the gold contacts facing up. Make sure that the SIM
card is fully inserted to be able to re-insert the battery.
7 Re-insert the battery by aligning the gold contacts in the battery with the pins
on the e265G device.
Figure 5 Inserting the SIM Card
8 Place the battery cover back and tighten the screw.
NOTE
You can also use a coin, flat tip screwdriver, or the edge of a card.
IMAGE PLACEHOLDER
ACTUAL ILLUSTRATION TO FOLLOW
NOTE
The SIM slot has a spring-loading mechanism. To remove the SIM card from the
slot, simply press the card into the slot and then release to eject the card.
NOTE
The plastic tab attached to the battery allows you to easily remove the battery from
the compartment. Make sure that the plastic tab is still visible after insertion.
IMAGE PLACEHOLDER
ACTUAL ILLUSTRATION TO FOLLOW