Installation Guide

E280 INSTALLATION GUIDE 11
CHAPTER 2
Device Setup
This chapter describes the device setup procedure. You will learn about:
• Usage Guidelines
• Unpacking the Shipping Carton
• Examining e280 Device Features
• Examining Connection Port
• Using the Battery
• Battery Behavior (No Power Pack)
• Connecting the Terminal Power Pack
• Charging the Battery
• Using the Smart Card Reader
• Using the Magnetic Card Reader
• Using the CTLS Reader
Usage
Guidelines
Use the following guidelines when using your e280.
Environmental
Factors
• Select a flat support surface, such as a countertop or table, to keep the device.
Please store your e280 device in a dry area:
• Operation temperature is 0~45 degree.
• Storage temperature is -20 to 60 degree.
• Do not use the device where there is high heat, dust, humidity, moisture, or
caustic chemicals or oils.
• Keep the device away from direct sunlight and anything that radiates heat,
such as a stove or motor.
Personal Security
Considerations
The e280 can be used as handover device. Always exercise extreme caution
when conducting transactions especially during PIN entry.
• Hand the e280 directly to the cardholder for PIN entry.
CAUTION
The device is not waterproof or dustproof, and is intended for indoor use only.
Any damage to the unit from exposure to rain or dust may void any warranty.