Installation Guide

DEVICE SETUP
Unpacking the Shipping Carton
12 E280 INSTALLATION GUIDE
• Encourage the cardholder to hold the e280 close to avoid others from seeing
the information entered.
Electrical
Considerations
• Avoid using this product during electrical storms.
• Avoid locations near electrical appliances or other devices that cause
excessive voltage fluctuations or emit electrical noise (for example, air
conditioners, electric motors, neon signs, high-frequency or magnetic security
devices, or computer equipment).
• Do not use the device near water or in moist conditions.
Unpacking the
Shipping Carton
Open the shipping carton and carefully inspect its contents for possible tampering
or shipping damage. The e280 is a secure product and any tampering may cause
the device to cease to function properly.
To unpack the
shipping carton
1 Remove and inspect the following items:
• e280 unit
• USB-C to USB cable
2 Remove all plastic wrapping from the unit and other components.
3 Remove the clear protective from the display.
4 Save the shipping carton and packing material for future repacking or storing
the device.
Examining e280
Device Features
Before you continue the installation process, familiarize yourself with the features
of the e280. (See Figure 2)
CAUTION
Do not use a unit that has been tampered with or otherwise damaged. This unit
comes equipped with tamper-evident labels. If a label or component appears
damaged, immediately notify the shipping company and your Verifone
representative or service provider.
NOTE
• Charge the e280 device for eight hours before initial use.
• The e280 device comes with an extra battery, that will power the security circuit of the
device, in case the device is tampered, and the main battery fails to charge. This extra
battery has a life of 2 yrs.
• Ensure not to store the device for more than 1 week without charging, else the
secondary battery gets discharged
in turn reducing the life of the battery.