Installation Guide
Table Of Contents
- e280 Installation Guide
- Contents
- Preface
- Device Overview
- Device Setup
- Specifications
- Maintenance
- Maintenance and Cleaning
- Verifone Service and Support
- Troubleshooting Guidelines
- Contact Verifone
DEVICE OVERVIEW
Features and Benefits
E280 INSTALLATION GUIDE 9
• 512MBMB Flash, 512MBMB SDRAM of memory
Security
• PCI PED 5.0 approved for PIN-based transactions
• SSL protocols
• Direct key injection using industry standard HSMs
• VeriShield Retain
• VeriShield Remote Key
• Verifone Secure Data
• VeriShield Total Protect
• MasterCard TQM
• IPP8 functionality plus multiple DUKPT engines
• EMV L1 and L2
• ISO7816-3, ISO7816-10, and EMV 4.3 standards
Connectivity
USB host/ device port
• Support UART0 software debug (TXD0, RXD0).
• USB2.0 high speed
• Support 5V/200mA for external USB peripherals
• USB host or device is configured by SW
• e280 USB-C port is on left hand side
Bluetooth (wireless communication)
• Bluetooth 4.2 BLE
• Support Eddystone + iBeacon
• RF transmitter output power Class 1
• RF receiver GFSK typical -90dBm, n/4 PSK typical -90dBm, 8DPSK typical -
83dBm
• UART3 interface for SOC communicates to BT
WiFi (wireless communication)(e280 Touch Only)
• WiFi 2.4 GHz and 5 GHz; a, b, g, n and ac
• Supports 2.4 GHz and 5 GHz
• SDIO for host interface
Charger IC
• Single cell switching mode Li-Ion battery charger
• Power path management integrated
• Programmable charging parameters