User's Manual
Table Of Contents
- e315 Installation Guide
- Contents
- Preface
- Device Overview
- Device Setup
- Selecting a Location
- Unpacking the Shipping Carton
- Examining Device Features
- Installing/ Removing an iPod/iPhone into the e315
- Installing/ Replacing MSAM Cards
- Connecting the e315 to a Power Source
- Connecting the e315 to a Wall- mount Charger
- Connecting the e315 to a Host Computer via Micro-USB
- Battery Behavior (No Power Cable)
- Conducting Wireless Transactions
- Using a Smart Card to Conduct Transactions
- Using the Magnetic Stripe Reader
- Using the CTLS Reader
- Using the Barcode Reader
- Specifications
- Maintenance
- VeriFone Service and Support
- Troubleshooting Guidelines
- Contact VeriFone
DEVICE SETUP
Selecting a Location
12 E315 INSTALLATION GUIDE
V
E
R
I
F
O N
E
C
O
N
F I
DE
N
T
I
A
L
R
E
VIS
I
ON
A.
6
Selecting a
Location
Use the following guidelines when selecting a location for your e315.
To select a location
• Select a location convenient for both merchant and cardholder.
• Select a location that is far from heavy metal objects.
• Select a location near a power outlet.
Environmental
Factors
• Select a flat support surface, such as a countertop or table, to keep the device
safe in between uses.
• Do not use the device where there is high heat, dust, humidity, moisture, or
caustic chemicals or oils.
• Keep the device away from direct sunlight and anything that radiates heat,
such as a stove or motor.
• Do not use the device outdoors.
Personal Security
Considerations
The e315 is a handover device and personal security is significantly impacted by
the carholder entering the PIN.
• Hand the e315 directly to the cardholder for them to enter their PIN.
• Encourage the cardholder to hold the e315 close to avoid allowing others to
see the information entered.
Electrical
Considerations
• Avoid using this product during electrical storms.
• Avoid locations near electrical appliances or other devices that cause
excessive voltage fluctuations or emit electrical noise (for example, air
conditioners, electric motors, neon signs, high-frequency or magnetic security
devices, or computer equipment).
• Do not use the device near water or in moist conditions.
WARNING
For safety, do not string cables or cords across a walkway.
CAUTION
The device is not waterproof or dustproof, and is intended for indoor use only.
Any damage to the unit from exposure to rain or dust may void any warranty.