User's Manual

DEVICE SETUP
Installing/Replacing MSAM Cards
E315 INSTALLATION GUIDE 17
V
E
R
I
F
O N
E
C
O
N
F I
DE
N
T
I
A
L
R
E
VIS
I
ON
A.
6
Installing/
Replacing MSAM
Cards
When you first receive your e315, you may need to install an MSAM card or you
may need to replace old cards.
To install/replace
MSAM
1 Unplug any cables or chargers from the e315.
2 Place the MSAM card on top of the tray with the gold contacts facing down.
3 Align the MSAM tray properly into the compartment and gently push the tray
until it locks in place.
Figure 6 Inserting an MSAM Card
CAUTION
Observe standard precautions when handling electrostatically sensitive devices.
Electrostatic discharges can damage this equipment. VeriFone recommends
using a grounded anti-static wrist strap.
NOTE
Not all applications require the use of an MSAM card.
NOTE
Make sure that the MSAM card sits firmly on the tray. If the MSAM card is not
installed correctly, the MSAM compartment does not close properly.