Installation Guide

SETUP
Contactless Smart Card Transaction
24 M424 INSTALLATION GUIDE
Using the Smart Card
Reader (Credit/Debit
Card Transaction)
To use the smart card reader (credit/debit card transaction):
1 MSR indicator lights will flash when ready to accept MSR transaction.
2 Position a magnetic card with the stripe to face downward, as shown in Figure
10.
3 Swipe the card through the magnetic card reader.
Figure 10 Using the Magnetic Card Reader
Contactless
Smart Card
Transaction
The device supports contactless transactions through an integrated contactless
module. The device only becomes active for contactless smart card transactions
when initialized by an application.
Performing a
Contactless Smart
Card Transaction
To perform a contactless smart card transaction:
1 Gently tap the card onto payment device or hold the card within 4 cm against
the surface of the device on the left side of keypad above the Contactless
Reader icon.
2 Activated LED icons accompanied by a short beeping sound indicates a
successful transaction.
Figure 11 Contactless Smart Card Transaction
M424 Wi-Fi/BT
Support
The M424 device includes an integrated WLAN RF transceiver for Wireless LAN
systems with advanced power management, and an integrated radio transceiver
for Bluetooth wireless systems.
Bluetooth Support
Supports BR/EDR and LE, including Eddystone and iBeacon.
CAUTION
Do not allow metallic surfaces to come in contact with the contactless module to
ensure that it works properly.