Installation Guide
Table Of Contents
- M440 Installation Guide
- Contents
- Preface
- Device Overview
- Setup
- Specifications
- Maintenance and Cleaning
- Service and Support
- Troubleshooting Guidelines
- Contact Verifone
M440 INSTALLATION GUIDE 13
CHAPTER 2
Setup
This chapter describes the setup procedure for:
• Device Location.
• Inside the Shipping Carton.
• Device Features.
• Connection Ports.
• M440 Connection Options.
• MSAM Card.
• Device Power Source.
• Smart Card Reader.
• Magnetic Card Reader.
• Contactless Smart Card Transaction.
• M440 Wi-Fi/BT Support.
• Optional Accessories.
Device Location
The following are guidelines used to select an ideal location for the device.
• The device must be used in an attended environment.
Ease of Use
• Select a location convenient for both merchant and cardholder.
• Select a flat support surface less than two meters high, such as a counter top
or table, or secure the device on a stand mount supplied by Verifone.
• Select a location near a power outlet, POS, ECR, or computer connected to
the device. For safety, do not string cables or cords across a walkway.
Environmental
Factors
• Do not use the device where there is excess heat, dust, humidity, moisture,
caustic chemicals or oils.
• The device is IP53 rated and designed to be used in dusty or moist
environment when mounted to a stand.
• Keep the device away from direct sunlight and anything that radiates heat,
such as a stove or a motor.
NOTE
• The M440 device must be mounted only on Verifone approved stands.
• The device is suitable for mounting only at height less than or equal to 2
meters.