Installation Guide
Table Of Contents
- M440 Installation Guide
- Contents
- Preface
- Device Overview
- Setup
- Specifications
- Maintenance and Cleaning
- Service and Support
- Troubleshooting Guidelines
- Contact Verifone
SETUP
PIN Protection Measures
14 M440 INSTALLATION GUIDE
• Do not use the device outdoors.
Electrical
Considerations
• Avoid using this product during electrical storms.
• Avoid locations near electrical appliances or other devices that cause
excessive voltage fluctuations or emit electrical noise (for example, air
conditioners, electric motors, neon signs, high-frequency or magnetic security
devices, or computer equipment).
• Avoid using the device near water or in moist conditions.
• Disconnect the device from its POS device before cleaning.
Contactless
Considerations
Avoid having metallic objects in proximity of the contactless antenna. If you need
to mount the device to vertical or inclined surfaces, use Verifone approved stand.
PIN Protection
Measures
Use the following techniques to provide effective screening of the PIN-entry
keypad during the PIN entry process. You can use these methods in combination,
although in some cases a single method might suffice.
• Position the device on the check-in stand in such a way as to block visual
observation of the PIN-entry process. Examples include:
• Visual shields designed into the check-in stand. The shields may be solely
for shielding purposes or may be part of the general check-in stand design.
• Position the device so that it is angled in such a way that PIN spying is
difficult.
• Install the PED on an adjustable stand that allows consumers to swivel the
device sideways and/or tilt it forwards/backwards to a position that makes
visual observation of the PIN-entry process difficult.
• Position in-store security cameras so that the PIN-entry keypad is not visible.
• This risk of shoulder-spying during PIN entry can be significantly reduced by
installing the optional approved privacy shield.
WARNING
Do not use the device near water, including a bathtub, wash bowl, kitchen sink or
laundry tub, in a wet basement, or near a swimming pool to avoid shock or
damage.
CAUTION
Using an enclosed metal frame or mount may negatively affect contactless
performance.