Installation Guide

SETUP
Inside the Shipping Carton
M440 I
NSTALLATION GUIDE 15
The following table describes the two preferred mounting methods and the
recommended measures to protect against PIN capture in four observation
corridors:
Verifone also recommends instructing the cardholder regarding safe PIN-entry.
This can be done with a combination of:
• Signage on the PED
• Prompts on the display, possibly with a click-through screen
• Literature at the point of sale
• A logo for safe PIN-entry process.
• You can secure PIN entry by installing a Privacy Shield (optional).
Mounting
Considerations
Verifone recommends the use of an approved stand for all mounting situations.
Position the device conveniently in relation to power, POS, ECR, and LAN
connections. Ensure the M440 device is located in a manner that allows
customers to swipe their magnetic cards or insert their Smart Cards in a smooth
and comfortable motion without encountering obstructions. If the unit needs to be
swiveled during normal operation, Verifone recommends the use of an approved
swivel stand.
Inside the
Shipping Carton
Open the shipping carton and carefully inspect its contents for possible tampering
or shipping damage. The device is a secure product. Tampering causes it to
cease to function or to operate in an unsecured manner.
Unpacking the
Shipping Carton
To unpack the shipping carton:
1 Carefully inspect the shipping carton and its contents for possible tampering or
damage.
Table 3 Mounting Methods and Protection Measures
Method Cashier
Customer in
Queue
Customers
Elsewhere
On-site
Cameras
Countertop
without stand
Use signage
behind the
PED
Install so that
customer is
between PED and
next in queue
No action
needed
Do not install
within view of
cameras
Countertop
with stand
No action
needed
Install so that
customer is
between PED and
next in queue
No action
needed
Do not install
within view of
cameras
NOTE
Special care is required when mounting the M440 device in sites that utilize anti-
theft devices positioned at doorways or surface mounted deactivator pads.
Devices of this type, such as Sensormatic brand devices generate strong
electromagnetic fields, which may interfere with M440 device. Always select
mounting locations at least 0.5 meter from doorway units and at least 2.0 meters
from surface mounted deactivator pads.