Installation Guide

SETUP
Inside the Shipping Carton
16 M440 INSTALLATION GUIDE
2 Validate the authenticity of the sender by verifying the shipping tracking
number and other information located on the product order paperwork.
3 Remove and inspect the contents of the shipping carton. The device ships in
multiple configurations, the carton may include all or any of the following:
• Device
• Connectivity cable
• Additional accessories
4 Remove all plastic wrapping from the device and components.
5 Remove the clear protective film from the display.
6 Inspect the terminal for possible tampering; see how to identify signs of
tampering in section Periodic Inspection.
7 Save the shipping carton and packing material for future repacking or moving
of the device.
Periodic Inspection Periodically inspect the terminal for possible tampering. Signs of tampering
include:
• Overlays in the PIN pad area
• Wires protruding out of the device
• Foreign objects inserted into the smart card slot or magnetic stripe slot
• Any bumps in the casing below the mag stripe slot and any noticeable
additional mag stripe head from the side
• Signs of damage to the tamper-evident labels
• A Tamper Warning message on the device display
NOTE
Power supply and connectivity cables are shipped separately or depending on
the customer requirements.
WARNING
Do not use a tampered or damaged unit. The device comes equipped with
tamper-evident labels. If a label or component appears damaged, please notify
the shipping company and your Verifone service provider immediately.
6
E
R
I
F
O
NE
6
E
R
IF
O
NE