Installation Guide

SETUP
Connection Ports
M440 I
NSTALLATION GUIDE 19
Connection
Ports
The device has one custom multiport interface for power and communications
connection.
Connecting Cables
and other Devices
To connect required cable connections and other devices:
1 Unscrew and remove cable cover as shown below.
Figure 3 Removing Cable Cover
2 Connect required cable connections or optional devices. Attaching the
multiport cable provides multiple connection options.
Figure 4 Multiport Cable Connected on the Rear of the Unit
3 Close cable compartment as shown below.
Figure 5 Closing Cable Compartment with Cable Cover
5
NOTE
Route the multiport cable through the cable cover first, as shown in the picture.
5