Installation Guide

SETUP
Smart Card Reader
22 M440 INSTALLATION GUIDE
2 Close cable cover.
Figure 8 Connecting Base Cable to Device
3 Plug in power supply to the power connection port on the base module.
4 Plug the AC power cord into a wall outlet or power surge protector.
Smart Card
Reader
The smart card transaction procedure can vary depending on the application.
Verify the proper procedure with your application provider before performing a
smart card transaction.
Using the Smart Card
Reader
To use the smart card reader:
1 Position the smart card with the gold contacts facing upward.
2 Insert the card into the smart card reader slot in a smooth, continuous motion
until it sets firmly.
Figure 9 Smart Card Reader
3 Remove the card only when the display indicates the transaction is complete.
Magnetic Card
Reader
The device has a magnetic card reader that uses a triple track stripe reader. This
gives the unit greater reliability over a wide range of swipe speeds and operating
environments.
3!-
3!-
3!-
3!-
CAUTION
Leave the smart card in the card reader until the transaction is completed.
Premature card removal can invalidate a transaction.