User's Manual Part 1

INSTALLATION
Installing the Device
14 M
X
800 SERIES INSTALLATION GUIDE
V
E
R
I
F
O
N
E
C
O
N
F
I
D
E
N
T
IA
L
T
E
M
P
L
A
T
E
R
E
V
E
Follow these steps to unpack the carton:
1 With the shipping carton right side up, open the top and remove all items from
the carton:
• Cable tie-down strap and screw
• Stylus, tether, and mounting holster
2 Remove the protective plastic wrap from the display or other components.
3 Place the components on a table or countertop.
4 Save the shipping carton and packing material for repacking or moving in the
future.
Selecting a Location
1 Select a location for the M
x
800 Series series terminal convenient for the user
and merchant that offers adequate ventilation and protection.
2 Place the M
x
800 Series terminal on a flat surface, such as a table or
countertop or mount on a mounting stand supplied by VeriFone. Avoid areas
with:
• Excessive heat or dust
• Oil or moisture
• Devices that cause excessive voltage fluctuations or electrical noise, such
as air conditioners, fans, electric motors, neon signs, or high-frequency
security devices.
• Direct sunlight or objects that radiate heat
3 Locate the peripheral conveniently in relation to power and ECR or LAN
connections. The power pack cable is approximately 1.8 meters (6 feet) long.
4 Before connecting the terminal to the power supply, complete the installation
by connecting all the cables (see Connecting the Device and Power Up with
the Multiport Cable).
WARNING
The M
x
800 Series terminal is designed for indoor use only.
WARNING
Do not use this product near water, including a bathtub, wash bowl, kitchen sink,
or laundry tub. Do not use in a wet basement or near a swimming pool.