User's Manual

DRAFT
MX 900 Series Installation Guide 17
March 1, 2012
Connecting the Device
This section provides brief descriptions of possible MX 900 Series terminal device
connections and the power pack connection. For complete information about
installing and using an optional device, see the user documentation supplied
with that device.
Ensure that the multiport cable or I/O module is not connected to a power pack
before attaching to the MX 900 Series terminal.
I/O Module
The MX 900 Series terminals use one of four I/O Modules without the multiport
cable to make the following connections:
Note: Use the Ethernet port on the I/O module only if the multiport cable is
not attached. Otherwise, use the Ethernet port on the multiport cable.
Connection I/O Module 1 I/O Module 2 I/O Module 3 I/O Module 4
Power Jack XXXX
Audio Jack XXXX
Berg X X
Tailgate / Com3 X
Ethernet X
Power Over Ethernet X X
USB 2.0 Device X X X
USB 1.1 Host X X
COM1 X X
COM2 XXX