User's Manual

NURIT 8000

Installation Manual 21

8. Installing the Battery

To install the battery:

1. Remove the battery-SAM-SIM-SD/MMC compartment

cover, as described in “Removing and Replacing the Battery-

SAM-SIM-SD/MMC Compartment Cover” on page 19.

2. Hold the battery, verifying that the side with the metal

contacts are facing downwards and that the rounded edge

is facing towards the back of the compartment.

3. While holding the battery at a 30° angle, slide the two tabs

on the front of the battery into the slots on the front wall of

the compartment.

4. Push the back of the battery down, until it snaps into place.

5. Replace the battery-SAM-SIM-SD/MMC compartment

cover, as illustrated in Figure 7-2 on page 20.

Figure 8-1 Installing the Battery

To remove the battery:

1. Remove the battery-SAM-SIM-SD/MMC compartment

cover, as described in “Removing and Replacing the Battery-

SAM-SIM-SD/MMC Compartment Cover” on page 19.

2. Insert your fingernail into the groove at the back of the

battery and lift the battery, snapping the battery out of

place.

3. Lift and remove the battery.

Battery Maintenance

• The supplied high-performance, smart Lithium-Ion battery

provides 7.4 VDC at 1800 mAH (minimum) capacity.

DRAFT