User's Manual

NURIT 8000
Installation Manual 25
11. Connecting the Car Adapter
You can use the car adapter to provide power to the
NURIT 8000 and to charge the installed Lithium-Ion battery.
To install the Car Adapter:
1. Connect the plug of the car adapter cable to the 3-pin
power jack on the front panel of the NURIT 8000.
2. Plug the car adapter into the vehicle's electrical power
socket.
Figure 11-1 Car Adapter Connection
To remove the car adapter:
1. Unplug the car adapter from the vehicle's electrical power
socket.
2. Unplug the car adapter battery charger cable from the
3-pin power jack on the front panel of the NURIT 8000.
Note
The LED indicator on the car adapter lights to indicate
the charge status of the battery, as described in
“Battery Charge Status” on page 20.
DRAFT