User's Manual

NURIT 8000

Installation Manual 33

Figure 14-2 SAM or SIM Cardholder Locking-Clasp

4. Lift the cardholder on its hinge to an upright position.

5. Hold the SAM or SIM card so that its chip side is facing

down towards the contacts on the reader.

6. Insert the end closest to the chip on the SAM or SIM card

into the cardholder.

Figure 14-3 SAM or SIM Card Installation

7. Close the SAM or SIM cardholder.

8. Lock the cardholder by sliding the cardholder locking clasp

in the direction indicated by the engraved arrow to the

LOCK position.

9. If necessary, replace the battery, as described on page 21.

1 Locking clasp

Note

Make sure that you first slide the end closest to the

chip on the card into the grooves of the holder.

1 SAM or SIM card 2 Beveled corner

3 Metal contact 4 Triangular protrusion

DRAFT