User's Manual
Table Of Contents
- NURIT 8000
- Preface
- Overview
- Setup
- Specifications
- Maintenance and Cleaning
- Troubleshooting Guidelines
- NURIT 8000 Appears to Have No Power
- Transactions Cannot be Completed Successfully
- Wireless Communication Does Not Work
- Operation with Peripheral Device Not Successful
- Printer Does Not Print
- Printer Continues Printing When Out of Paper
- Magnetic Stripe Card Reader Does Not Function Properly
- Smart Card Reader Does Not Function Properly
- The Keypad Does Not Respond
- An Incorrect Response or Data Is Obtained
- “Tampered Device” Displayed On Screen and Keypad Inoperable
- Service and Support
- Index
SETUP
Selecting Location
NURIT 8000 I
NSTALLATION GUIDE 11
D
R
A
F
T
R
E
V
I
S
I
O
N
A
.
3
• Maintain at least 22 cm (8.5 in) of clear space around the terminal in its fixed
operating location, in order to assure good ventilation.
Indoor Use
The NURIT 8000 is designed to be operated indoors in the following manner:
• Powered only by the built-in battery.
• Using the AC/DC power adapter for battery charging only.
• Using the optional external modem.
Outdoor Use
The NURIT 8000 is designed to be operated outdoors in the following manner:
• Powered only by the built-in battery.
• In a vehicle, using the optional car adapter.
Electrical
Considerations
• Avoid using this product during electrical storms.
• Avoid locations near electrical appliances or other devices that cause
excessive voltage fluctuations or emit electrical noise (for example, air
conditioners, electric motors, neon signs, high-frequency or magnetic security
devices, or computer equipment).
CAUTION
Under no circumstances should the NURIT 8000 be powered or charged
outdoors using its AC/DC adapter.
WARNING
For persons using a pacemaker or other medical device, please read the
following important safety notes:
Though most electronic equipment and critical medical devices are shielded
against radio-frequency signals, it is important to realize the possibilities of
potential interference and to know the standard precautions that may be taken.
Consult the manufacturer of your medical device to determine its level of
shielding.
NOTE
When the NURIT 8000 terminal is used as a secure PIN entry device:
• The customer should be able to obstruct visual observation of the PIN
entry with his/her body and hand.
• The cardholder must be clearly instructed to obstruct visual observation of
the PIN entry with his/her body and hand.
Failure to comply with these conditions may render the PIN pad non-compliant
with ISO 9564 for PIN protection and may violate card association requirements
for PIN entry devices.