User's Manual
Table Of Contents
- Wireless Palmtop Solution
- Foreword
- Table of Contents
- List of Figures
- 1. Product Regulatory Information
- 2. General Safety Instructions
- 3. Specifications
- 4. Initial Setup
- 5. Optional Accessories
- 6. General Features
- 7. Installing the Battery Pack
- 8. Connecting the NURIT 8000 to an AC Power Outlet
- 9. Installing the External Modem
- 10. Connecting the Car Adapter
- 11. Loading Paper in the Printer
- 12. Installing the Keypad Privacy Shield
- 13. Installing a SIM, SAM, or SD/MMC Card
- 14. Connecting Peripheral Devices
- 15. Connecting a Cellular Headset
- 16. Care and Maintenance
- 17. Troubleshooting
- Appendix A: Using the Magnetic Card Reader
- Appendix B: Using the Smart Card Reader
- Contact Information
Installation Manual 9
4. Initial Setup
Unpacking the Box
To u n pa c k t h e b o x :
1. Place the box right side up on a stable, flat surface.
2. For secure models of the NURIT 8000, verify that the
Secure Device label that seals the box is intact.
Figure 4-1 Secure Device Label
3. For secure models of the NURIT 8000, peel off or cut
through the Secure Device label.
4. Open the box and carefully remove its contents.
5. Carefully inspect the contents for any damaged or missing
components.
Caution
If the Secure Device label is damaged or
missing, do not open the box. This could be an
indication of device tampering and may affect
the validity of the warranty for the device.
Notify your Lipman distributor.
Note
It is recommended that you save the box for
future repacking or moving of the terminal.