User's Manual
Table Of Contents
- Wireless Palmtop Solution
- Foreword
- Table of Contents
- List of Figures
- 1. Product Regulatory Information
- 2. General Safety Instructions
- 3. Specifications
- 4. Initial Setup
- 5. Optional Accessories
- 6. General Features
- 7. Installing the Battery Pack
- 8. Connecting the NURIT 8000 to an AC Power Outlet
- 9. Installing the External Modem
- 10. Connecting the Car Adapter
- 11. Loading Paper in the Printer
- 12. Installing the Keypad Privacy Shield
- 13. Installing a SIM, SAM, or SD/MMC Card
- 14. Connecting Peripheral Devices
- 15. Connecting a Cellular Headset
- 16. Care and Maintenance
- 17. Troubleshooting
- Appendix A: Using the Magnetic Card Reader
- Appendix B: Using the Smart Card Reader
- Contact Information
18 Installation Manual
7. Installing the Battery Pack
To install the battery pack:
1. Carefully hold the terminal facedown or place it on a soft,
smooth surface so as not to damage the LCD touch screen.
2. Hold the battery pack, verifying that the side with an
arrow pictogram is facing upward.
3. Slide the two tabs on the front of the battery pack into the
slots on the front wall of the battery pack compartment.
4. Press down on the battery pack until it snaps into place.
Figure 7-1 Battery Pack Installation
To remove the battery pack:
1. Carefully hold the terminal facedown or place it on a soft,
smooth surface so as not to damage the LCD touch screen.
2. Press and lift the locking tab on the battery pack to
release it from the compartment.
3. Remove the battery pack from the terminal.
Figure 7-2 Battery Pack Removal
Caution
Charge the battery pack for a period of 12 hours
before first use.