User's Manual
Table Of Contents
- Wireless Palmtop Solution
- Foreword
- Table of Contents
- List of Figures
- 1. Product Regulatory Information
- 2. General Safety Instructions
- 3. Specifications
- 4. Initial Setup
- 5. Optional Accessories
- 6. General Features
- 7. Installing the Battery Pack
- 8. Connecting the NURIT 8000 to an AC Power Outlet
- 9. Installing the External Modem
- 10. Connecting the Car Adapter
- 11. Loading Paper in the Printer
- 12. Installing the Keypad Privacy Shield
- 13. Installing a SIM, SAM, or SD/MMC Card
- 14. Connecting Peripheral Devices
- 15. Connecting a Cellular Headset
- 16. Care and Maintenance
- 17. Troubleshooting
- Appendix A: Using the Magnetic Card Reader
- Appendix B: Using the Smart Card Reader
- Contact Information
28 Installation Manual
Figure 13-3 SIM/SAM Card Installation
7. Close the SAM or SIM cardholder.
8. Lock the cardholder by sliding the cardholder locking
clasp in the direction indicated by the engraved arrow to
the LOCK position.
9. If required, replace or install the electronic cards
compartment cover. See
“Installing the Electronic Cards
Compartment Cover” on page 31.
10. Replace the battery pack, as described in “Installing the
Battery Pack” on page 18.
Installing a SIM Card in the TEL SIM Slot
The NURIT 8000 includes a slot to install a SIM card, which is
required if the terminal implements GSM or GPRS wireless
communication technology. See “Electronic Cards Configurations”
on page 26 for a description of when this slot is used.
To install a SIM card in the TEL SIM slot:
1. Remove the battery pack from the terminal, as described
in
“Installing the Battery Pack” on page 18.
2. Using the pointed end of the touch screen stylus (or any
instrument with a similarly-sized pointed end), push the
SIM cardholder eject button at the front left side of the
TEL
SIM slot until the SIM cardholder is ejected.
1 SAM or SIM Card 2 Bevelled Corner
3 Metal Contact 4 SAM1 Cardholder
5 SAM2 or SIM Cardholder
5
1
3
2
4