User's Manual
Table Of Contents
- Wireless Palmtop Solution
- Foreword
- Table of Contents
- List of Figures
- 1. Product Regulatory Information
- 2. General Safety Instructions
- 3. Specifications
- 4. Initial Setup
- 5. Optional Accessories
- 6. General Features
- 7. Installing the Battery Pack
- 8. Connecting the NURIT 8000 to an AC Power Outlet
- 9. Installing the External Modem
- 10. Connecting the Car Adapter
- 11. Loading Paper in the Printer
- 12. Installing the Keypad Privacy Shield
- 13. Installing a SIM, SAM, or SD/MMC Card
- 14. Connecting Peripheral Devices
- 15. Connecting a Cellular Headset
- 16. Care and Maintenance
- 17. Troubleshooting
- Appendix A: Using the Magnetic Card Reader
- Appendix B: Using the Smart Card Reader
- Contact Information
30 Installation Manual
Installing an SD/MMC Card
Some models of the NURIT 8000 may be equipped with a single
SD/MMC (Secure Digital/Multi-Media Card) card slot in the
electronic cards compartment.
To install an SD/MMC card:
1. Remove the battery pack from the terminal, as described
in
“Installing the Battery Pack” on page 18.
2. Remove the electronic cards compartment cover, if it is in
place.
3. Hold the SD/MMC card directly above the SD/MMC card
slot, with the metal contacts facing down and the narrow
edge with the beveled corner pointing towards the slot
opening.
Figure 13-7 Positioning the SD/MMC Card
4. Lower the SD/MMC card into position.
5. Press down on the SD/MMC card while sliding it into the
slot.
1 SD/MMC Card 2 Bevelled Corner
3 SD/MMC Card Slot Opening 4 SAM Cardholder
5 SD/MMC Cardholder
1
5
2
3
4