User's Manual
Table Of Contents
- Wireless Palmtop Solution
- Foreword
- Table of Contents
- List of Figures
- 1. Product Regulatory Information
- 2. General Safety Instructions
- 3. Specifications
- 4. Initial Setup
- 5. Optional Accessories
- 6. General Features
- 7. Installing the Battery Pack
- 8. Connecting the NURIT 8000 to an AC Power Outlet
- 9. Installing the External Modem
- 10. Connecting the Car Adapter
- 11. Loading Paper in the Printer
- 12. Installing the Keypad Privacy Shield
- 13. Installing a SIM, SAM, or SD/MMC Card
- 14. Connecting Peripheral Devices
- 15. Connecting a Cellular Headset
- 16. Care and Maintenance
- 17. Troubleshooting
- Appendix A: Using the Magnetic Card Reader
- Appendix B: Using the Smart Card Reader
- Contact Information
Installation Manual 33
14. Connecting Peripheral Devices
You can connect a variety of optional peripheral devices to the
NURIT 8000.
To connect a peripheral device to the NURIT 8000:
1. Connect the peripheral device to the appropriate end of
the adapter cable (see
“Optional Accessories” on page 14).
2. Insert the other end of the adapter cable into the data port
on the front panel of the NURIT
8000.
Figure 14-1 Peripheral Device Connection
Note
Peripheral devices may require special adapter
cables to connect to the NURIT 8000. Certain
peripheral devices may also require an external
power supply.
Refer to the specific product documentation of
the peripheral devices or contact your local
Lipman representative for further details.
1
Contactless Card Reader
2
Signature Capture Device
3
PC
4
Barcode Reader
5
Electronic Scale
6
Check Reader